hpEgressRateLimitPortControlMode 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2

The mode by which this port will be Rate-Limited on egress. If egressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If egressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If egressRateLimitPerPortOnlyBpsMode is configured, there will be a single maximum bits-per-second rate for the entire port. If egressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If egressRateLimitPerQueueBpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in bits-per-second (again, the sum of these values must not exceed the maximum Bytes-per-second capability of the network link). The queues are defined under hpEgressRateLimitPortPrctTable. When egress rate-limiting is disabled, there are no maximum controls on egress for this port.