This object when read, always returns a value of other(1).
The behavior of setting this variable to each of the acceptable
values is as follows:
Other: Results in a BadValue error
Connect: Generates a connect signal to ECM
to begin a connection sequence. The
'wfFddiSmtRemoteDisconnectFlag' is
cleared on the setting of this
variable to 1.
Disconnect: Generates a disconnect signal to
ECM and sets the
'wfFddiSmtRemoteDisconnectFlag'
to TRUE.
Path_Test: Initiates a station path test.
The 'PathTest' variable is set
to 'Testing'. The results of
this action are not specified
in the standard.
Self_test: Initiates a station self test.
The results of this action are
not specified in the standard.
Disable_A: Disable_A causes a PC_Disable on the
A port if the A port mode is peer.
Disable_B: Disable_B causes a PC_Disable on the
B port if the B port mode is peer.
Disable_M: Disable_M causes a PC_Disable on all
M ports.
Attempts to set this object to all other values results in a
BadValue error. Agents may elect to return a BadValue error on
attempts to set this variable to PathTest or SelfTest.