Indicates the VLAN-based PPPoE VMAC function.
Options:
1. enable(1) -indicates that the PPPoE VMAC function is enabled.
2. disable(2) -indicates that the PPPoE VMAC function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VLAN-based PPPoE VMAC function can be configured in
hwIpDslamL2pVlanCtrlVmacPPPoESubStatus of HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The status of the PPPoE VMAC function is determined by its
VLAN-level switch. The PPPoE VMAC function of a VLAN is enabled
only when the VLAN-level switch is enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based PPPoE VMAC function
in the VLAN service profile takes effect.