The administration status of frame.
Options:
1. nooperation(-1) - default state of the system
2. disable(1) - indicates that the frame administration state is disable
3. enable(2) - indicates that the frame administration state is enable
4. reset(3) - reset the shelf. If you need to reset the shelf immediately,
perform the operation only. If you need to reset the shelf after a certain period,
you also need to set hwFrameResetTimeout.
If you need to reset the control shelf, the entire system is reset;
otherwise, the control board in the specified shelf is reset
5. test(4) - test the frame
6. confirm(5) - confirm the frame
7. delete(6) - delete the frame info
8. batchconfirm(7) - confirm the boards in a shelf in batches
9. bind(8) - bind ont serial number with the extended frame ID