hwSlotWorkMode 1.3.6.1.4.1.2011.6.3.3.2.1.6

Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time.