Board status management.
This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode.
Options:
1. nooperation(-1) -default state of the system
2. disable(1) -disable the running of a board
3. enable(2) -enable the running of a board
4. reset(3) -reset a board
5. test(4) -test a board
6. confirm(5) -confirm the board in the discovery(5) state in hwSlotOperStatus
After the operation, the board is in the config state
7. switch(6) -main board switchover on access network UA device
8. delete(7) -delete a board
9. forbidden(8) -forbid a board
10.unforbidden(9) -permit a board
11.endservice(10) -used in the exit delay of a board
12.startservice(11) -used in the exit delay of a board
13.poweron(12) -used to power on a board
14.poweroff(13) -used to power off a board
15.is(14) -in service
16.oos(15) -out of service
17.hotreset(16) -hotreset a board