This variable indicates the Line Status of the
interface. It contains loopback state information
and failure state information. The ds3LineStatus
is a bit map represented as a sum, therefore, it
can represent multiple failures and a loopback
(see acDs3LoopbackConfig object for the type of
loopback) simultaneously. The ds3NoAlarm must be
set if and only if no other flag is set.
If the ds3loopbackState bit is set, the loopback
in effect can be determined from the
ds3loopbackConfig object.
The various bit positions are:
1 ds3NoAlarm No alarm present
2 ds3RcvRAIFailure Receiving Yellow/Remote
Alarm Indication
4 ds3XmitRAIAlarm Transmitting Yellow/Remote
Alarm Indication
8 ds3RcvAIS Receiving AIS failure state
16 ds3XmitAIS Transmitting AIS
32 ds3LOF Receiving LOF failure state
64 ds3LOS Receiving LOS failure state
128 ds3LoopbackState Looping the received signal
256 ds3RcvTestCode Receiving a Test Pattern
512 ds3OtherFailure any line status not defined
here
1024 ds3UnavailSigState Near End in Unavailable Signal
State
2048 ds3NetEquipOOS Carrier Equipment Out of Service