atmIfCACbrPerVcQueueLimitReferenceRate 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.90

This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. This attribute is ignored on CQC-based ATM cards, because they do not support per-VC queues at the CBR service category. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 80000 for all cards which support per-VC queuing at the CBR service category (3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2, 2pOC3MmAtm2). For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )