This attribute provides the reason (if any) for an inactive status to be
sent to the subnet.
The value is notApplicable when the aBitStatusFromIf attribute is
active.
The value is remoteUserSignaled if the remote interface originating
the A-Bit status detects that the virtual circuit is down at the remote
network through the LMI protocol. The remote interface must be
running network site LMI protocol for this A-Bit status reason to be
sent.
The value is localLmiError if the LMI protocol is down at this
interface.
The value is localLinkDown if the physical link is disabled at this
interface.
The value is pvcDown if no A-Bit status has been sent to this
interface from the local network.
The value is missingFromLmiReport if the remote interface did not
provide a reason along with the inactive A-Bit status.
DESCRIPTION