vsFramerInsertedOutputDelay 1.3.6.1.4.1.562.2.4.1.80.2.12.1.14

This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It is required to add output delay so that the statistical variation in the transit time of cells crossing the network does not cause gaps in speech. Backbone networks where high priority traffic consumes a high percentage of trunk bandwidth will require a higher insertedOutputDelay to compensate for the greater cell delay variation (CDV). insertedOutputDelay must be default if this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card. On all other cards, insertedOutputDelay can be set to any value. On these cards, default is equivalent to 22.