mscAtmIfCAMaxVccs 1.3.6.1.4.1.562.36.2.1.114.3.100.1.6

This attribute specifies the maximum number of usable Vccs (and Vpt Vccs) that can be configured on this AtmIf. The value must not exceed the number of non-reserved Vcc identifiers in the Vcc space supported by this AtmIf (which is specified by the ConnectionMapping component). Furthermore, if the AtmIf is linked to a LogicalProcessor of cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all spared AtmIfs linked to that Lp must not exceed the protectedConnectionPoolCapacity attribute of the Arc component. The sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all unspared AtmIfs linked to that Lp must not exceed connectionPoolCapacity attribute of the Arc component. Note that 3 connections are used for every standard Vpt and 2 for each basic Vpt. If the Arc component doesn't exist, the default value of the Arc connectionPoolCapacity and protectedConnectionPoolCapacity attribute is used as the limit. If this attribute is set to autoConfigure, then on 32 port Multi- Service Access cards its value is configured as 100, and on all other cards it is 255. VALUES ( 65535 = autoConfigure )