mscAtmIfCACbrWeightPolicy
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.165
This attribute specifies the default policy which is applied when
calculating the fairness weight for unshaped connections of the
CBR service category. The fairness weight for a connection
determines the relative amount of bandwidth which that connection
obtains, compared to other connections in the same service
category. Connections with equal weight get equal transmit
opportunities. Connections with higher weights get more transmit
opportunities compared with connections that have lower weights.
An override to this default may be specified for a provisioned
connection under the Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the CBR service category.
This attribute is ignored on CQC-based ATM cards. This attribute is
also ignored on ATM IP cards if unshapedTransmitQueueing is set
for common queuing.
If this attribute is set to scr, the fairness weight is proportional to the
transmit sustained cell rate (SCR) of a connection. Connections
with a higher SCR have a higher fairness weight. For connections
with txTrafficDescType 3, which have no SCR, the sustained cell
rate is assumed to be equal to the peak cell rate.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.