mscAtmIfCARtVbrMinPerVcQueueLimit 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70

This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue limit of a per-VC queue is obtained by scaling down the txQueueLimit based on the shaping rate of that queue (shaping rate for the connection, and for standard Vpt Vccs, the shaping rate of the Vpt). This produces a constant delay for various queue lengths. The txQueueLimit provides an upper bound while minPerVcQueueLimit provides the lower bound. The value of this attribute must not be greater than the value of the txQueueLimit attribute. If this service category is used by Trunks the value of minPerVcQueueLimit must be at least 88. For the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards, this attribute does not apply since per-VC queueing is not available. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr minPerVcQueueLimit value as their default. To determine the queue limit of a standard Vpt Vcc, the txQueueLimit is scaled down by the Vpt shaping rate.