mscAtmIfVptCANrtVbrCellLossRatio 1.3.6.1.4.1.562.36.2.1.114.9.5.4.100.1.3

This attribute specifies the tolerable cell loss ratio (CLR) for nrt- VBR traffic. The number is the negative logarithm (base 10) of the CLR. In other words if the target CLR = 1E-10 then NrtVbr cellLossRatio = 10. This number must be greater than or equal to RtVbr cellLossRatio since rt-VBR traffic has a higher discard priority. The NrtVbr cellLossRatio is used by the Connection Admission Control (CAC) algorithm to compute the required (equivalent) cell rate for nrt-VBR connections. There is a trade-off between the service category CLR and the achievable Vpt bandwidth utilization. To guarantee an excellent service category, the CLR should be as small as possible (e.g., 1E- 10). However, a smaller CLR results in a larger equivalent cell rate for a given connection and hence a lower Vpt bandwidth utilization. Setting this attribute to 0 means that a CLR of 1 can be tolerated. In this case, no bandwidth is reserved for nrt-VBR connections, and CAC is effectively turned off. All nrt-VBR connections are admitted.