mscFrAtmDlciNiwfTrafficParmConvPolicy 1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.5

This attribute indicates the traffic parameter conversion policy that is used for this connection. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected. - PCR(0+1) is based on the ATM link rate. - SCR(0+1) is based on the CIR and EIR. - MB(0+1) is based on Bc, Be, CIR, EIR and AR. - Takes into account that the instantaneous rate of the frame relay stream can be above CIR and up to the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR(0+1) is based on AR. - SCR(0) is based on the CIR. - MBS(0) is based on Bc, CIR, and AR. - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR(0+1) is based on the CIR and EIR. - SCR(0) is based on the CIR. - MBS(0) is based on the CIR. - The maximum PCR is no longer based on the AR but rather on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected. - PCR(0+1) is based only on the CIR policyNotAvailable indicates that the trafficParmConvPolicy is not yet available for this connection.