mscHtdsPlcAddressToCall 1.3.6.1.4.1.562.36.2.1.82.3.10.1.20

This attribute is the PLC's remote end point's address in the format of a NSAP address. As such it must consist of a string of hex digits although not all 40 digits must be specified. For an alternative representation of end point's addresses, see romoteName attribute. If the addressToCall is provisioned, it must match localAddress provisioned on the remote end or the connection will not be established. Connections establish faster and are unique if both ends are provisioned with addressToCall. AddressToCall must be used when the romote end of the connection resides in different topology region. If it resides in the same topology region, then romoteName may be used. When both remoteName and addressToCall are provisioned, addressToCall takes precedence. That is, connection will be established to the service specified by addressToCall.