clMeshLtDataRateValue 1.3.6.1.4.1.9.9.606.1.2.1.1.9

This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type, data rate will vary. If the value of clMeshNodeBackhaul object is 'dot11a', data rates can be one of the following possible values. mbps6(4) mbps9(5) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) mbps108(13) Additionally following data rates are supported if 802.11a supports 11n. htMcs0(14) htMcs1(15) htMcs2(16) htMcs3(17) htMcs4(18) htMcs5(19) htMcs6(20) htMcs7(21) htMcs8(22) htMcs9(23) htMcs10(24) htMcs11(25) htMcs12(26) htMcs13(27) htMcs14(28) htMcs15(29) If the value of clMeshNodeBackhaul object is 'dot11b', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps6(4) mbps9(5) mbps11(6) If the value of clMeshNodeBackhaul object is 'dot11g', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps6(4) mbps9(5) mbps11(6) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) mbps108(13) This object cannot be modified when the value of clMeshLtRowStatus object in the same row is 'active'.