cseTcamResourceType 1.3.6.1.4.1.9.9.97.1.9.1.1.1

The resource type which take up TCAM space. aclStorageMask(1) indicates that TCAM space is allocated to store ACL masks. aclStorageValue(2) indicates that TCAM space is allocated to store ACL value. aclDynamicStorageMask(3) indicates that TCAM space is allocated to dynamically store ACL masks. aclDynamicStorageValue(4) indicates that TCAM space is allocated to dynamically store ACL values. qosStorageMask(5) indicates that TCAM space is allocated to store QoS masks. qosStorageValue(6) indicates that TCAM space is allocated to store QoS value. qosDynamicStorageMask(7) indicates that TCAM space is allocated to dynamically store QoS masks. qosDynamicStorageValue(8) indicates that TCAM space is allocated to dynamically store QoS values. l4PortOperator(9) indicates that TCAM space is allocated for layer 4 port operators purpose. interfaceMapping(10) indicates that TCAM space is allocated for interface mapping purpose. ingressInterfaceMapping(11) indicates that TCAM space is allocated for ingress interface mapping purpose. egressInterfaceMapping(12) indicates that TCAM space is allocated for egress interface mapping purpose. louSource(13) indicates that TCAM space is allocated as source LOUs (Logical Operation Unit). louDestination(14) indicates that TCAM space is allocated as destination LOUs. andOr(15) indicates that TCAM space is allocated for ANDOR purpose. orAnd(16) indicates that TCAM space is allocated for ORAND purpose. aclAdjacency(17) indicates that TCAM space is allocated for ACL adjacency purpose. aclHighStorageMask(18) indicates that high bank TCAM space is allocated to store ACL masks. aclHighStorageValue(19) indicates that high bank TCAM space is allocated to store ACL value. aclLowStorageMask(20) indicates that low bank TCAM space is allocated to store ACL masks. aclLowStorageValue(21) indicates that low bank TCAM space is allocated to store ACL values. qosHighStorageMask(22) indicates that high bank TCAM space is allocated to store QoS masks. qosHighStorageValue(23) indicates that high bank TCAM space is allocated to store QoS value. qosLowStorageMask(24) indicates that low bank TCAM space is allocated to store QoS masks. qosLowStorageValue(25) indicates that low bank TCAM space is allocated to store QoS values. sgacl(26) indicates that TCAM space is allocated for SGACL (Security Group Access Control List) purpose. accounting(27) indicates that TCAM space is allocated for accounting purpose such as AS (Autonomous System) based accounting, classification based accounting. ipv6Ext(28) indicates that TCAM space is allocated for IPv6 Extended Header lookup purpose. ethertype(29) indicates that TCAM space is allocated for layer2 ethertype lookup purpose. destInfo(30) indicates that TCAM space is allocated for destination information lookup purpose. dgtSgtRegion(31) indicates that TCAM space is allocated for specific SGT (Secutiry Group Tag), DGT (Destination Group Tag) pairs. anyAnyRegion(32) indicates that TCAM space is allocated for SGT (Secutiry Group Tag), DGT (Destination Group Tag) pairs with one or both of them as ANY. tcamALabel(33) indicates that TCAM space is allocated for labels used by TCAM A entries. tcamBLabel(34) indicates that TCAM space is allocated for labels used by TCAM B entries. destInfoIn(35) indicates that TCAM space is allocated for destination information table for IFE (Ingress Forwarding Engine) ACL redirects. destInfoOut(36) indicates that TCAM space is allocated for destination information table for OFE (Output/Egress Forwarding Engine) ACL redirects. tcam0Bank0(37) indicates that TCAM space is allocated for TCAM 0 Bank 0. tcam0Bank1(38) indicates that TCAM space is allocated for TCAM 0 Bank 1. tcam1Bank0(39) indicates that TCAM space is allocated for TCAM 1 Bank 0. tcam1Bank1(40) indicates that TCAM space is allocated for TCAM 1 Bank 1. tcam0Aggregate(41) indicates that TCAM space is allocated for the aggregate of Bank 0 and Bank 1 on TCAM 0. tcam1Aggregate(42) indicates that TCAM space is allocated for the aggregate of Bank 0 and Bank 1 on TCAM 1. bank0Aggregate(43) indicates that TCAM space is allocated for the aggregate of TCAM 0 and TCAM 1 for Bank 0. bank1Aggregate(44) indicates that TCAM space is allocated for the aggregate of TCAM 0 and TCAM 1 for Bank 1. lou(45) indicates that TCAM space is allocated for LOUs (Logical Operation Unit). bothLouOperands(46) indicates that TCAM space is allocated for LOUs with both operands. singleLouOperands(47) indicates that TCAM space is allocated for LOUs with single operands. louL4SourcePort(48) indicates that TCAM space is allocated for LOUs with L4 source port in comparison. louL4DstPort(49) indicates that TCAM space is allocated for LOUs with L4 destination port in comparison. louL3PacketLength(50) indicates that TCAM space is allocated for LOUs with L3 Length in comparison. louIpTos(51) indicates that TCAM space is allocated for LOUs with IP ToS (Type of Service) in comparison. louIpDscp(52) indicates that TCAM space is allocated for LOUs with IP DSCP (Differentiated Services Code Point) in comparison. louIpPrecedence(53) indicates that TCAM space is allocated for LOUs with IP Precedence in comparison. louIpTtl(54) indicates that TCAM space is allocated for LOUs with IP TTL in comparison. tcpFlags(55) indicates that TCAM space is allocated for TCP Flags. l4DynamicProtocolCam(56) indicates that TCAM space is allocated for L4 Dynamic Protocol CAM. macEtypeOrProtoCam(57) indicates that TCAM space is allocated for MAC Etype or Protocol CAM. nonL4OpLabelsTcam0(58) indicates that TCAM space is allocated for labels without using any L4 operator resources like LOUs or TCP Flags for TCAM 0. nonL4OpLabelsTcam1(59) indicates that TCAM space is allocated for labels without using any L4 operator resources like LOUs or TCP Flags for TCAM 1. l4OpLabelTcam0(60) indicates that TCAM space is allocated for labels using any L4 operator resources like LOUs or TCP Flags for TCAM 0. l4OpLabelTcam1(61) indicates that TCAM space is allocated for labels using any L4 operator resources like LOUs or TCP Flags for TCAM 1. ingressDestInfoTable(62) indicates that TCAM space is allocated for Ingress Destination Info Table. egressDestInfoTable(63) indicates that TCAM space is allocated for Egress Destination Info Table. ingressTcam(64) indicates that ingress TCAM resource utilization. ingressIpv6Tcam(65) indicates that ingress TCAM space is allocated for IPv6 compression. ingressLou(66) indicates that ingress TCAM space is allocated for LOUs (Logical Operation Unit). ingressBothLouOperands(67) indicates that ingress TCAM space is allocated for LOUs with both operands. ingressSingleLouOperands(68) indicates that ingress TCAM space is allocated for LOUs with single operands. ingressLouL4SourcePort(69) indicates that ingress TCAM space is allocated for LOUs with L4 source port in comparison. ingressLouL4DstPort(70) indicates that ingress TCAM space is allocated for LOUs with L4 destination port in comparison. ingressLouL3PacketLength(71) indicates that ingress TCAM space is allocated for LOUs with L3 Length in comparison. ingressLouL3Ttl(72) indicates that ingress TCAM space is allocated for LOUs with L3 TTL in comparison. ingressLouL2Ttl(73) indicates that ingress TCAM space is allocated for LOUs with L2 TTL in comparison. ingressTcpFlags(74) indicates that ingress TCAM space is allocated for TCP Flags. egressTcam(75) indicates that egress TCAM resource utilization. egressIpv6Tcam(76) indicates that egress TCAM space is allocated for IPv6 compression. egressLou(77)indicates that egress TCAM space is allocated for LOUs (Logical Operation Unit). egressBothLouOperands(78) indicates that egress TCAM space is allocated for LOUs with both operands. egressSingleLouOperands(79) indicates that egress TCAM space is allocated for LOUs with single operands. egressLouL4SourcePort(80) indicates that egress TCAM space is allocated for LOUs with L4 source port in comparison. egressLouL4DstPort(81) indicates that egress TCAM space is allocated for LOUs with L4 destination port in comparison. egressLouL3PacketLength(82) indicates that egress TCAM space is allocated for LOUs with L3 Length in comparison. egressLouL3Ttl(83) indicates that egress TCAM space is allocated for the LOUs with L3 TTL in comparison. egressLouL2Ttl(84) indicates that egress TCAM space is allocated for LOUs with L2 TTL in comparison. egressTcpFlags(85) indicates that egress TCAM space is allocated for TCP Flags.